gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Procedures|Page 5494 > < Procedures|Page 5492
Page 2
background image

Installation Procedure

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

1. Install the drain plug and tighten to 33 Nm (24 lb ft).
2. Fill the differential carrier assembly with axle lubricant. Use the proper fluid. Refer to Approximate Fluid Capacities   (See: Maintenance/Service

Intervals) and Fluid and Lubricant Recommendations   (See: Maintenance/Service Intervals).

3. Install the fill plug and tighten to 33 Nm (24 lb ft).
4. Lower the vehicle.

Rear Axle Lubricant Replacement (8.6, 9.5 Inch Axle)

Rear Axle Lubricant Replacement (8.6, 9.5 Inch Axle)

Procedures|Page 5494 > < Procedures|Page 5492