Savana 3500 V8-4.8L (2009)
7. Remove the adjusting nut using the J 2222-C .
8. Remove the adjusting nut.
Important: If the oil seal remains on the axle hub, remove the seal using a suitable seal removal tool.
9. Remove the hub from the axle housing.
10. Remove the rotor, if necessary. Refer to Rear Brake Rotor Replacement (With Single Rear Wheel) (See: Brakes and Traction Control/Disc Brake
System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement (With Single Rear Wheel))Rear Brake
Rotor Replacement (With Dual Rear Wheel) (See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and
Repair/Removal and Replacement/Rear Brake Rotor Replacement (With Dual Rear Wheel)).
11. Remove the oil seal from the wheel hub using a suitable seal removal tool.
12. Remove the inner hub bearing.