Savana 3500 V8-4.8L VIN V (2005)
1. Install the new sealing washers.
2. Install the front evaporator tube into the vehicle.
3. Install the front evaporator tube to the rear evaporator tube.
NOTE: Refer to Fastener Notice in Service Precautions
4. Install the rear evaporator tube retaining nut (1).
Tighten
Tighten the nut to 16 N.m (12 lb ft).
5. Install the evaporator inlet hose to the front evaporator tube.
6. Install the evaporator inlet hose nut to the front evaporator tube.
Tighten
Tighten the nut (1) to 16 N.m (12 lb ft).
