Savana 3500 V8-4.8L VIN V (2005)
1. Connect the evaporator tube (1) to the auxiliary evaporator core.
Tighten
Tighten the hose fitting to 48 N.m (35 lb ft).
2. Install the evaporator tube retaining nuts (2) to the engine and the body.
Tighten
Tighten the retaining nuts to 6 N.m (53 lb in).
3. Install the bolt retaining the hose (1) to the transmission bracket.
Tighten
Tighten the retaining bolt to 5 N.m (44 lb in).
4. Lower the vehicle.
5. Install the auxiliary evaporator outlet tube to the compressor hose.
Tighten
Tighten the fitting to 48 N.m (35 lb ft).
6. Install the engine cover.
7. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
8. Leak test the fittings of the components using the J 39400-A.
