Savana 3500 V8-4.8L VIN V (2005)
Hose/Line HVAC: Service and Repair
Inlet
EVAPORATOR TUBE REPLACEMENT - INLET
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant from the A/C system. Refer to Refrigerant Recovery and Recharging.
2. Remove the coolant recover reservoir.
3. Remove the evaporator inlet hose nut (1) from the evaporator.
4. Remove the evaporator inlet hose clip screw (2).
5. Remove the evaporator inlet hose retaining nut from the front hose.
6. Remove the evaporator inlet hose from the vehicle.
7. Remove the sealing washers.
INSTALLATION PROCEDURE
1. Install the new sealing washers.
2. Install the evaporator inlet hose in to the vehicle.
3. Install the evaporator inlet hose to the evaporator.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the evaporator inlet hose retaining nut (1).
Tighten
Tighten the nut to 16 N.m (12 lb ft).
