Savana 3500 V8-4.8L VIN V (2005)
1. Install the accelerator cable through the dash panel. Snap the accelerator cable cover tangs (1) through the dash panel.
2. Install the accelerator cable through the slot in the accelerator pedal lever (2).
3. Seat the retainer (3) in the accelerator pedal lever (2).
4. Connect the accelerator cable to the throttle body lever.
5. Slide the accelerator cable into the slot on the accelerator cable bracket. Snap the locking tab into position on the engine sight shield mounting
bracket. Clip the accelerator cable onto the generator bracket.
6. Clip the accelerator cable into the engine sight shield mounting bracket.
7. Test for complete throttle opening and closing range by operating the accelerator pedal. Also inspect the carpet fit under the accelerator pedal. The
throttle should operate freely without binding between full closed throttle and wide open throttle (WOT).
8. Install the left instrument panel insulator.
9. Install the air cleaner assembly.
10. Install the engine cover.
