gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Brakes - ABS Light ON/Multiple DTC's Present|Page 200 > < Electrical - MIL ON/DTC's Set By Various Control Modules|Page 190
Page 1
background image

Electronic Brake Control Module: Customer Interest
Brakes - ABS Light ON/Multiple DTC's Present

Bulletin No.: 05-05-25-002

Date: February 02, 2005

INFORMATION

Subject:
Diagnostic Information on Anti lock Brake System (ABS) Diagnostic Trouble Code(s) (DTC) C0035, C0040, C0050, C0055 and/or P0609

Models:
2003-2005 Chevrolet Express Van Models
2003-2005 GMC Savana Van Models

When diagnosing an "ABS light on" condition, diagnosis with a scan tool may reveal a DTC C0035, C0040, C0050, C0055 and/or P0609.

It has been found that Electronic Brake Control Modules (EBCM) have been incorrectly replaced when the actual concern was related to the ABS system
wiring.

Important:

It has been found that EBCMs have been incorrectly replaced when the true condition was related to the ABS system wiring.

When diagnosing DTCs related to wheel speed sensor issues, first thoroughly inspect connections or circuitry that may cause an intermittent malfunction.
Most intermittent conditions are caused by faulty electrical connections or wiring. Inspect for the following items:

^

Wiring broken inside the insulation

^

Poor connection between the male and female terminal at a connector

^

Poor terminal to wire connection - some conditions that fall under this description are poor crimps, poor solder joints, crimping over the wire
insulation rather than the wire itself and corrosion in the wire to terminal contact area.

^

Wire insulation that is rubbed through - this may cause an intermittent short as the bare area touches other wiring or parts of the vehicle.

If the customer's concern is that the ABS indicator is on only during humid conditions such as rain, snow or vehicle washes, thoroughly inspect the wheel
speed sensor circuits for signs of water intrusion.

Wiring Diagnostic Information

Refer to the service manual:

^

Testing for Intermittent and Poor Connections (Refer to SI Document ID # 303631)

^

Inducing Intermittent Fault Conditions (Refer to SI Document ID # 511757)

^

Testing for Electrical Intermittents (Refer to SI Document ID # 303628)

^

Checking Aftermarket Accessories (Refer to Document ID # 816776)

ABS DTC Diagnostic Information

^

DTC C0035 or C0040 (Refer to SI Document ID # 1335968)

Brakes - ABS Light ON/Multiple DTC's Present|Page 200 > < Electrical - MIL ON/DTC's Set By Various Control Modules|Page 190