Savana 3500 V8-4.8L VIN V (2005)
7.1.
Engage the end near the red push-button.
7.2.
Press down firmly on the back end to fasten the cover; you should hear an audible click.
7.3.
Inspect for complete seating and flushness of the mating seams of the upper and lower cover.
8.
Remove, insert, and remove the latch from the buckle a second time to ensure proper operation.
9.
On front seats, slide the buckle sleeve back into place.
10.
On front seats, reconnect the buckle sensor wire.
11.
On front seats, install the seat belt buckle retaining bolt to the seat.
Tighten
Tighten the seat belt buckle retaining bolt to 52 N.m (38 lb ft).
12.
On front seats, be sure that the buckle sleeve is returned to the original position.
13.
Repeat this procedure on all buckles identified in the inspection procedure.
