Savana 3500 V8-4.8L VIN V (2005)
Tie Rod End: Service and Repair
Rack and Pinion Outer Tie Rod End Replacement
^
Tools Required
-
J 24319-B Steering Linkage and Tie Rod Puller
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the outer tie rod stud retaining nut.
4. Loosen the jam nut (2) on the inner tie rod (1).
5. Disconnect the outer tie rod from the steering knuckle using J 24319-B .
6. Remove the outer tie rod (3) from the inner tie rod (1).
Installation Procedure