gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Driver Knee Bolster Bracket Replacement|Page 15226 > < Driver Knee Bolster Bracket Replacement|Page 15224
Page 6
background image

Tighten the nuts (2) to 6 N.m (53 lb in).

7. Remove the blocks from the wheels.
8. Release the parking brake.

Instrument Panel Extension Replacement

Instrument Panel Extension Replacement

Removal Procedure

1. Fully open the instrument panel I/P extension door, if equipped.
2. Remove the lower I/P extension bolts (4).
3. Remove the upper I/P extension bolts (3).
4. Remove the I/P lower extension from the vehicle (2).

Installation Procedure

Important:  Ensure the HVAC duct engages the I/P extension duct.

1. Install the I/P lower extension (2) to the vehicle.

An audible click indicates I/P lower extension has engaged the retainer pins (1).

Notice:  Refer to Fastener Notice.

2. Install the upper (3) and lower (4) bolts to the I/P lower extension (2).

Tighten the bolts (3, 4) to 10 N.m (89 lb in).

3. Close the I/P extension door, if equipped.

Instrument Panel Extension Trim Plate Replacement

Instrument Panel Extension Trim Plate Replacement

Removal Procedure

Caution:  Refer to Restraint System Service Precautions.

Driver Knee Bolster Bracket Replacement|Page 15226 > < Driver Knee Bolster Bracket Replacement|Page 15224