Savana 3500 V8-6.0L (2007)
Removal Procedure
Caution: Refer to Restraint System Service Precautions.
1. Disable the SIR. Refer to SIR Disabling and Enabling.
2. Remove the knee bolster trim panel.
3. Remove the instrument panel (I/P) upper trim pad.
4. Remove the screws (1, 3) from the I/P trim pad.
5. Remove the I/P trim pad (2).
Installation Procedure
1. Install the I/P trim pad (2) to the I/P.
Notice: Refer to Fastener Notice.
2. Install the screws (1, 3).
Tighten the screws (1, 3) to 3 N.m (26 lb in).
3. Install the I/P upper trim pad.
4. Install the knee bolster trim panel.
5. Enable the SIR. Refer to SIR Disabling and Enabling.
Instrument Panel Upper Trim Pad Replacement
Instrument Panel Upper Trim Pad Replacement
Removal Procedure
Caution: Refer to Restraint System Service Precautions.
1. Remove the left and right windshield garnish moldings.
2. Remove the instrument panel (I/P) cluster trim plate bezel.
3. Remove the screws (1, 3) from the I/P upper trim pad (2).
4. Lift the I/P upper trim pad (2) on an angle and slide rearward in order to disengage the retainers at front of I/P.
