Savana 3500 V8-6.0L (2007)
8. Install the park brake cable eyelet (2) to the actuator lever (1).
9. Compress the park brake cable return spring (3) and install the park brake cable conduit to the backing plate (4).
10. Push the cable conduit into place until the locking tabs are fully engaged in the park brake cable bracket.
11. Install the tire and wheel.
12. Lower the vehicle.
13. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling.
14. Adjust the park brake cable. Refer to Park Brake Adjustment.