Savana 3500 V8-6.0L (2007)
12. Remove the gasket (1) from the rocker cover.
13. Discard the OLD gasket.
Installation Procedure
Important:
^
All gasket surfaces should be free of oil an/or other foreign material during assembly.
^
DO NOT reuse the valve rocker arm cover gasket.
^
The valve rocker arm cover bolt grommets may be reused.
^
If the PCV valve grommet has been removed from the rocker cover, install a NEW grommet during assembly.
1. Install a NEW rocker cover gasket (1) into the groove of the valve rocker arm cover.