gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Exhaust System|Service and Repair|Page 3717 > < Exhaust Heat Shield Replacement - Body Panel|Page 3713
Page 1
background image

Muffler: Service and Repair

Muffler Replacement (4.3L, 4.8L, 5.3L, and 6.0L)

Removal Procedure

Caution: Refer to Protective Goggles and Gloves Caution.

Caution: Refer to Exhaust Service Caution.

Important: The muffler is serviced as one complete unit with an exhaust pipe and tail pipe. Some variations of vehicles may have an
aftermarket tail pipe added. When the vehicle is raised on the hoist it must be raised by the frame to allow the rear axle to be lowered.

1. Raise the vehicle. Refer to Vehicle Lifting.

2. If equipped with 4.3L engine with a single catalytic converter pipe, remove the nuts retaining the catalytic converter pipe from the muffler flange.

Exhaust System|Service and Repair|Page 3717 > < Exhaust Heat Shield Replacement - Body Panel|Page 3713