Savana 3500 V8-6.0L (2007)
Heater Hose: Service and Repair
Heater Inlet Hose Replacement (4.3L, 4.8L, 5.3L, 6.0L)
Heater Inlet Hose Replacement (4.3L, 4.8L, 5.3L, 6.0L)
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
1. Partially drain the engine coolant. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill).
2. Remove the inlet heater hose clamps using the J 38185.
3. Remove the inlet heater hose.
Installation Procedure
1. Install the inlet heater hose.
2. Install the inlet heater hose clamps using the J 38185.
3. Fill the engine coolant. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill).