Savana 3500 V8-6.0L (2007)
Power Steering Line/Hose: Service and Repair
Power Brake Booster Inlet Hose Replacement
Power Brake Booster Inlet Hose Replacement
Removal Procedure
Notice: Refer to Power Steering Hose Disconnected Notice .
1. Install a drain pan under the vehicle.
2. Siphon the power steering fluid from the reservoir to prevent excessive spillage.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
4. Remove the power brake booster inlet hose (2) from the power steering pump (1) through the wheel well.
5. Lower the vehicle.
6. Remove the power brake booster inlet hose (1) from the power brake booster (2).
7. Remove the power brake booster inlet hose from the vehicle.
Installation Procedure
Notice: Refer to Installing Hoses Without Twists or Bends Notice .
1. Route the hose in the same position the hose occupied prior to removal.
Notice: Refer to Fastener Notice .