Savana 3500 V8-6.0L (2007)
Starter Motor: Service and Repair
Starter Motor Replacement (4.8L, 5.3L, and 6.0L)
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Remove the right transmission cover bolt.
4. Remove the starter bolts.
5. Disconnect the oil level sensor electrical connector.
6. Slide the starter forward until the starter clears the transmission.
7. Remove the starter solenoid nut.
8. Remove the starter lead from the solenoid stud.
9. Remove the starter lead nut.
10. Remove the positive cable from the starter stud.
11. Place the starter on a workbench.
