Savana 3500 V8-6.0L (2007)
27. Install the A/T shift lock control.
28. Put the shift lever clevis into the NEUTRAL position.
29. Adjust the A/T shift lock control by performing the following steps:
1. Pull out the tab (1) on the adjuster block (2) side of the A/T shift lock control.
2. Press on the adjuster block (2) to compress the internal adjuster spring which disengages the adjuster teeth.
3. Slide the adjuster block (2) as far away from the solenoid as possible.
4. Push inward on the tab (1) in order to lock the adjuster block (2) in place.
30. Inspect the A/T shift lock control for the following items:
1. The A/T shift lock control must lock the shift lever clevis when the shift lever clevis is put into the PARK position.
Once the steering column is installed in the vehicle, the gear shift lever must remain in the PARK position unless the brake pedal is depressed.
2. The solenoid will be energized.
31. Adjust the A/T shift lock control if needed.
