Savana 3500 V8-6.0L (2007)
Tie Rod: Service and Repair
Steering Linkage Outer Tie Rod Replacement
Steering Linkage Outer Tie Rod Replacement
Tools Required
J 24319-B Steering Linkage and Tie Rod Puller
Removal Procedure
1. Raise and suitable support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel.
3. Remove the outer tie rod to steering knuckle retaining nut.
4. Disconnect the outer tie rod from the steering knuckle using the J 24319-B .
5. Loosen the jam nut (2) and remove the outer tie rod (1) from the inner tie rod (3).
6. Inspect the shaft for bent or damaged threads.
7. Clean the tapered surface of the steering knuckle.
Installation Procedure