Savana 3500 V8-6.6L DSL Turbo (2009)
8. Install the intake manifold tube bolts (2, 4) and nut (1) and tighten to 25 Nm (18 lb ft).
9. Install the engine wiring harness clip bolt (3) and tighten to 15 Nm (11 lb ft).
10. Install the engine wiring harness clip to the intake manifold tube.
11. Install the rear intake manifold tube nut (2) and tighten to 25 Nm (18 lb ft).
12. Install the 2 rear intake manifold tube bolts (3) and tighten to 25 Nm (18 lb ft).
13. Install the engine wiring harness clip bolt (1) at the rear of the intake manifold tube and tighten to 15 Nm (11 lb ft).
