Savana 3500 V8-6.6L DSL Turbo (2009)
1. Install the power steering pump remote reservoir (3) to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the power steering pump remote reservoir (4) mounting nuts and tighten to 11 Nm (97 lb in).
3. Install the reservoir inlet hose (3) to the reservoir.
4. Connect the reservoir outlet hose to the reservoir.
5. Bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair).
