Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
4. For cutaway vehicles, install the splash shield.
Tighten the splash shield bolts to 25 Nm (18 ft. lbs.).
5. Lower the vehicle.
6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.
7. Revise the tire calibration using the Tire Size Calibration function.
8. Verify correct system operation. Refer to Diagnostic Starting Point - Antilock Brake System. See: Testing and Inspection/Initial Inspection and
Diagnostic Overview
