Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
7. Remove the brake caliper bracket mounting bolts (2).
8. Remove the brake caliper bracket (1) and brake caliper as an assembly.
9. Notice:
Support the brake caliper with heavy mechanic's wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose
is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which may cause
damage to the brake hose and in turn may cause a brake fluid leak.
Remove the brake caliper mounting bolts from the brake caliper mounting bracket and support the brake caliper with heavy mechanic's wire or
equivalent.
10. Remove the brake pads from the brake caliper mounting bracket.
11. Remove the anti-rattle clips from the brake caliper mounting bracket.
Installation Procedure
1. Install the anti-rattle clips to the brake caliper mounting bracket.
2. Install the brake pads to the brake caliper mounting bracket.
3. Install the brake caliper to the brake caliper mounting bracket.
4. Install the brake caliper mounting bolts to the brake caliper mounting bracket. Do not tighten.
5. Install the brake caliper and brake caliper mounting bracket (1) as an assembly.
6. Perform the following procedure before installing the brake caliper mounting bracket bolts.
1. Remove all traces of the original adhesive patch.
2. Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
