Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
1. If installing the old sensor, coat the threads with sealant GM P/N 12346004 (Canadian P/N 10953480), or equivalent.
2. Install the ECT sensor (1).
NOTE: Refer to Fastener Notice.
Tighten the sensor to 20 N.m (15 lb ft).
3. Connect the ECT sensor electrical connector.
4. Fill the cooling system, if necessary. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill).
See: Service and Repair
5. Install the brace to the intake air heater-to-generator bracket.
6. Install the air cleaner assembly.