Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
Heater Hose: Service and Repair
Heater Coolant Heater Inlet Hose
HEATER COOLANT HEATER INLET HOSE REPLACEMENT
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Remove the engine cover.
2. Partially drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill).
3. Remove the air cleaner.
4. Remove the upper fan shroud.
5. Reposition the heater hose clamp at the heater pipe assembly using J 38185.
6. Remove the heater hose from the heater pipe assembly near the front of the engine.
