Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
Radiator Hose: Service and Repair
Radiator Inlet Hose Replacement
Radiator Hose Replacement - Inlet (LLY)
Removal Procedure
Tools Required
^
J38185 Hose Clamp Pliers
1. Remove the air cleaner assembly.
Caution: To avoid being burned, do not remove the radiator cap or surge tank cap while the engine is hot. The cooling system will
release scalding fluid and steam under pressure if radiator cap or surge tank cap is removed while the engine and radiator are still hot.
2. Partially drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill).
3. Using J38185, reposition the radiator inlet hose clamps.
4. Remove the radiator hose from the radiator.