Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
Intake Manifold: Service and Repair
Intake Manifold Replacement - Left
Intake Manifold Replacement - Left
Removal Procedure
1. Remove the air cleaner.
2. Remove the upper radiator fan shroud.
3. Remove the radiator fan.
4. Remove the engine cover.
5. Remove the center intake manifold.
6. Remove the left fuel rail.
7. Remove the intake manifold bolts/nuts.
Important: The intake manifold uses sealer. Pry at the area by the fuel rail bolt holes in order to avoid damage to the sealing surface.
8. Remove the intake manifold.
9. To prevent entry of debris into the cylinder head, tape the openings.
10. If required, clean and inspect the intake manifold. Refer to Intake Manifold Cleaning and Inspection.
Installation Procedure
1. Apply a 2 - 3 mm (1/8 inch) wide, by 0.5 - 1.5 mm (1/16 inch) high bead of sealant, GM P/N 97720043 (Canadian P/N 88901148), or equivalent
to the intake manifold.