Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
connected to the fuel supply line. Command the fuel pump ON with a scan tool and prime the fuel system until all air is purged. Start and run the
engine, while observing the fuel entering the transparent hose.
-
If air bubbles are still present, refer to Diagnostic Aids.
-
If no air bubbles are present, remove the EN-47969 and run the engine to ensure no fuel leaks exist.
REPAIR INSTRUCTIONS
IMPORTANT: Always perform the Diagnostic Repair Verification after completing the diagnostic procedure. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests
and Procedures
Fuel Injection Pump Replacement
Fuel Sender Assembly Replacement