Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
Water Pump: Service and Repair
Water Pump Replacement (6.6L Engine)
Removal Procedure
1. Remove the thermostat bypass pipes.
2. Remove the crankshaft balancer.
3. Remove the water pump to water pump outlet pipe nuts (2).
4. Remove the engine wiring harness retainer from the water pump bolt.
5. Remove the water pump bolts. Note the location of the bolts. The bolts are three different lengths.
6. Remove the water pump.
7. Remove and discard the water pump O-ring and the water pump outlet pipe gasket.
Installation Procedure
