Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
Compressor Clutch Coil: Service and Repair
COMPRESSOR CLUTCH COIL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the clutch plate retaining bolt (1).
2. Remove the clutch plate assembly.
3. Remove the clutch hub/bearing snap ring.
4. Remove the clutch hub/bearing assembly.
5. Remove the clutch coil connector bracket retaining screw.
6. Remove the clutch coil snap ring.
7. Remove the clutch coil assembly.
INSTALLATION PROCEDURE
1. Install the coil assembly to the compressor.
2. Install the coil snap ring.
3. Install the coil connector retaining bracket screw.
Tighten the screw to 9 N.m (80 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the clutch hub/bearing assembly.
5. Install the clutch hub/bearing snap ring.
6. Install the clutch plate assembly.
7. Install the clutch plate retaining bolt (1).
Tighten the bolt to 18 N.m (13 lb ft).