Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
3. Remove the discharge hose mounting bolt (1) from the A/C compressor.
4. Remove the discharge hose (4) from the A/C compressor.
5. Remove the discharge hose nut from the condenser.
6. Remove the discharge hose from the condenser.
7. Disconnect the A/C pressure switch electrical connector.
8. Remove the discharge hose from the vehicle.
9. Discard all of the used sealing washers. Cap the system openings.
INSTALLATION PROCEDURE
1. Install the discharge hose to the vehicle.
2. Connect the A/C pressure switch electrical connector.
3. Install new sealing washers to the discharge hose.