Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
Tighten the nut (1) to 16 N.m (12 lb ft).
7. Install the front evaporator tube to the condenser.
8. Install the front evaporator tube nut (1) to the condenser.
Tighten the nut to 16 N.m (12 lb ft).
9. Install the grille.
10. Install the coolant recover reservoir.
11. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
12. Leak test the fittings of the components using the J 39400-A.
Evaporator Tube Replacement - Inlet
EVAPORATOR TUBE REPLACEMENT - INLET
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
