Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
1. Connect the evaporator tube (1) to the auxiliary evaporator core.
Tighten the hose fitting to 48 N.m (35 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the evaporator tube retaining nuts (2) to the engine and the body.
Tighten the retaining nuts to 6 N.m (53 lb in).
3. Install the bolt retaining the hose (1) to the transmission bracket.
Tighten the retaining bolt to 5 N.m (44 lb in).
4. Lower the vehicle.
5. Install the auxiliary evaporator outlet tube to the compressor hose.
Tighten the fitting to 48 N.m (35 lb ft).
6. Install the engine cover.
7. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
8. Leak test the fittings of the components using the J 39400-A.
Suction Hose Replacement
SUCTION HOSE REPLACEMENT
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the air cleaner assembly.
