Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
3. Install the suction hose to the accumulator.
4. Install the suction hose to accumulator retaining nut.
Tighten the nut to 16 N.m (12 lb ft).
NOTE: Refer to Fastener Notice.
5. Install the suction hose (3) to the A/C compressor.
6. Install the suction hose to compressor mounting bolt (1).
Tighten the bolt to 16 N.m (12 lb ft).
7. Install the air cleaner assembly.
8. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
9. Leak test the fittings of the component using the J 39400-A.