Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
Wiring Harness: Service and Repair
ENGINE WIRING HARNESS ASSEMBLY REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the engine cover.
3. Remove both front wheelhouse panels.
4. Remove the air cleaner outlet duct.
5. Loosen the charged air cooler outlet duct to intake hose clamp.
IMPORTANT: Do not use a screwdriver or other tool to pry the hose loose. The hose can be torn or damaged. Loosen the hose by twisting.
6. Remove the charged air cooler outlet duct from the intake.
7. Loosen the charged air cooler inlet duct connector to turbocharger clamp (1).
IMPORTANT: Do not use a screwdriver or other tool to pry the hose loose. The hose can be torn or damaged. Loosen the hose by twisting.
8. Remove the charged air cooler inlet duct connector (4) from the turbocharger.
