Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
4. If equipped with the 6.6L engine, install the exhaust muffler nuts until snug.
Important: Ensure that the manifold pipe is square to the exhaust pipe adapter.
5. If equipped with a 6.6L engine, slide the exhaust pipe clamp down and around the pipe connection.
Notice: Refer to Fastener Notice in Service Precautions.
6. Tighten the exhaust pipe clamp and muffler nuts.
^
Tighten the clamp to 40 Nm (30 ft. lbs.).
^
Tighten the nuts to 40 Nm (30 ft. lbs.).
7. Lower the transmission onto the transmission support.
8. Install the transmission mount to transmission support nuts.
Tighten the bolts to 40 Nm (30 ft. lbs.).
9. Remove the support from the transmission.
10. Lower the vehicle.
