Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
32. Position the junction block and bracket.
33. Install the battery cable junction block bracket bolt (1) to the power steering pump bracket.
Tighten the bolt to 9 N.m (80 lb in).
34. Install the water outlet bolts.
35. Install the water outlet to the thermostat housing.
36. Connect the negative battery cable.
37. Prime the fuel system. Refer to Fuel System Priming.
38. Start the engine. If the engine stalls, repeat the above step.
39. Once the engine starts, inspect for fuel leaks.
40. Install the engine cover.