Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
6. Connect the right fuel return line to the return/junction block line.
7. Install the hose (1) to the return/junction block.
8. Position the fuel hose clamp at the return/junction block.
9. Prime the fuel system. Refer to Fuel System Priming.
10. Start the engine. If the engine stalls, repeat the above step.
11. Once the engine starts, inspect for fuel leaks.
12. Install the engine cover.
Fuel Return Pipe Replacement
FUEL RETURN PIPE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the engine wiring harness.
2. Remove the water outlet bolts.
3. Remove the water outlet from the thermostat housing crossover.
4. Remove the exhaust gas recirculation (EGR) cooler tube.
5. Reposition the fuel return line hose clamps (1).
6. Remove the fuel return line hoses from the return line.
