Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
7. Install the EGR cooler.
8. Prime the fuel system. Refer to Fuel System Priming.
9. Start the engine. If the engine stalls, repeat the above step.
10. Once the engine starts, inspect for fuel leaks.
Fuel Hose Replacement - Fuel Filter/Heater Element Housing to Fuel Feed Block
FUEL HOSE REPLACEMENT - FUEL FILTER/HEATER ELEMENT HOUSING TO FUEL FEED BLOCK
REMOVAL PROCEDURE
1. Drain the fuel from the filter.
2. Drain the fuel from the diesel fuel conditioning module. Refer to Water-in-Fuel Draining Procedure.
3. Remove the hose clamps.
4. Remove the hose.
INSTALLATION PROCEDURE
