Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
3. Install the air inlet tube and NEW gaskets.
4. Install the air inlet tube nuts.
Tighten the nuts to 25 N.m (18 lb ft).
5. Connect the intake air heater electrical connector.
6. Connect the MAP sensor electrical connector.
7. Install the engine harness clip to the air inlet tube.
8. Install the air inlet tube to intake manifold tube bolt and nut.
Tighten the bolt/nut to 10 N.m (89 lb in).