Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
Valve Clearance: Specifications
^
Notice: Refer to Fastener Notice in Service Precautions.
Adjust the valve lash to 0.3 mm (0.012 inch). Refer to Valve Clearance Adjustment Specifications to determine which valves that can be adjusted
when the engine is at Top Dead Center.
Tighten the valve lash lock nut to 22 Nm (16 ft. lbs.).
^
Rotate the crankshaft one revolution to bring the number 1 cylinder at Top Dead Center of the exhaust stroke.
^
Adjust the valve lash to 0.3 mm (0.012 inch). Refer to Valve Clearance Adjustment Specifications to determine which valves that can be adjusted
when the engine is at Top Dead Center.
^
Tighten the valve lash lock nut to 22 Nm (16 ft. lbs.).