Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
3. Connect the electrical connectors to the EBCM.
4. For cutaway vehicles, install the splash shield.
Tighten the splash shield bolts to 25 Nm (18 ft. lbs.).
5. Lower the vehicle.
6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.
7. Revise the tire calibration using the Tire Size Calibration function.
8. Verify correct system operation. Refer to Diagnostic Starting Point - Antilock Brake System. See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview
