Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
5. Remove the front door lower pillar garnish molding.
6. Disengage the front seat belt retractor guide (4) from the pillar.
7. Remove the shoulder/seat belt retractor bolt (2) from the lower pillar.
8. Remove the shoulder/seat belt retractor (1) assembly from the vehicle.
INSTALLATION PROCEDURE
1. Install the shoulder/seat belt retractor assembly to the vehicle.
2. Install the shoulder/seat belt retractor retaining bolt to the lower pillar.
Tighten the shoulder/seat belt retractor retaining bolt to 52 N.m (38 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the front door lower pillar garnish molding.
4. Install the front door upper pillar garnish molding.
