Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
INSTALLATION PROCEDURE
1. Install the seat belt retractor to the vehicle.
2. Install the seat belt retractor retaining bolts to the vehicle.
-
Tighten the seat belt retractor upper retaining bolt to 52 N.m (38 lb ft).
-
Tighten the seat belt retractor lower retaining bolt to 10 N.m (89 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the rear corner garnish molding.
4. Secure the seat belt escutcheon to the rear corner garnish molding.
No. 5 Left Rear
SEAT BELT RETRACTOR REPLACEMENT - NO. 5 LEFT REAR
REMOVAL PROCEDURE
1. Remove the rear corner garnish molding.
2. Remove the seat belt retractor bolts (1) from the seat belt retractor.
3. Remove the seat belt retractor from the vehicle.
INSTALLATION PROCEDURE