Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
Bell Housing: Service and Repair
Engine Flywheel Housing Replacement
Tools Required
^
J37228 Seal Cutter
Removal Procedure
1. Remove the engine flywheel.
2. Remove the turbocharger oil return pipe nuts from the top of the flywheel housing.
3. Remove the turbocharger oil return pipe studs.
Important: The upper oil pan must be removed before removing the flywheel housing.
4. Remove the flywheel housing bolts.
5. Separate the flywheel housing from the cylinder block using J37228.
6. Remove the flywheel housing.
