Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
Torque Converter Clutch Solenoid: Service and Repair
Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid, TCC Solenoid, and Wiring
Harness
Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid, TCC Solenoid, and Wiring Harness
^
Tools Required
-
J 28458 Seal Protector Retainer Installer
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the transmission oil pan and the filter.
3. Disconnect the transmission harness 20-way connector from the transmission internal harness pass-through connector. Depress both tabs on the
connector and pull straight up; do not pry the connector.
4. Important:
Removal of the valve body is not necessary for the following procedure.
Remove the 1-2 accumulator assembly. Do not remove the spacer plate.
5. Disconnect the internal wiring harness electrical connectors from the following components:
^
Transmission fluid pressure switch (1)
^
1-2 shift control solenoid (2)
^
2-3 shift control solenoid (3)
^
Pressure control solenoid (4)
^
TCC PWM solenoid (5)
^
3-2 control solenoid (6)
