Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
Reinstall the air inlet grille panel.
Align the retainers in the body with the tabs on the grille panel. Press the retainers into place.
Connect the washer hoses to the air inlet grille panel.
Install the screws in sequential order (1-7), to retain the air inlet grille panel to the cowl vent.
Tighten
Tighten the screws to 1.7 N.m (15 lb in).
Close the hood.
Reinstall the driver and passenger side wiper arms. Refer to the Wiper Arm Replacement procedure in SI.
Wiper Transmission Assembly Replacement
Tools Required
J 39232 Wiper Transmission Separator
J 39529 Wiper Transmission Installer
Disconnect the electrical connector from the wiper motor.
Remove the wiper transmission assembly retaining bolts. Remove the wiper transmission assembly from the vehicle.
