Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Front Door Interior Handle: Service and Repair
Door Inside Handle Replacement
DOOR INSIDE HANDLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the front door trim panel.
2. Remove the front door water deflector.
3. Remove the center of the rivets using a center punch.
4. Drill out the rivet from the inside door handle using a 6.35 mm (1/4 in) drill bit.
5. Remove the inside door handle from the door inner panel.
6. Remove the lock rod and door handle rod from the inside door handle.
INSTALLATION PROCEDURE
1. Install the inside door handle by inserting the tabs into the rear door inner panel slots.
2. Install the lock rod and the door handle rod to the inside door handle.
