Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
4. Press the weatherstrip into place. If you are reinstalling the original weatherstrip, use GM weatherstrip adhesive GM P/N 12345097 (Canadian P/N
10953479) at the bottom ends of the rear door opening weatherstrip in order to retain the weatherstrip to the body.
5. Install the retainers in the ends of the rear door opening weatherstrip into the holes in the floor panel.
6. Install the rear door opening frame garnish molding.
7. Install the rear floor trim plate.
8. Install the passenger side rear corner trim panel.
9. Install the driver side body side rear trim panel.
10. Install the rear corner garnish molding.
