gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Grille Replacement (Base)|Page 18444 > < Trailer Hitch|Service and Repair
Page 1
background image

Grille: Service and Repair
Grille Replacement (Base)

Grille Replacement (Base)

Removal Procedure

1. Remove the park/turn signal lamp.

2. Remove the bolts (2) that retain the radiator grille (1) to the radiator support.
3. Remove the retainers at the top of the radiator grille (1) from the radiator support.
4. Lift the radiator grille (1) in order to remove the locating pins on the bottom of the radiator grille (1) from the radiator support.
5. Remove the radiator grille (1) from the vehicle.

Installation Procedure

1. Install the radiator grille (1) to the vehicle.
2. Align the locating pins on the bottom of the radiator grille (1) with the pockets on the radiator support.

Lower the radiator grille (1) into position.

3. Align the locating pin and the retainers at the top of the radiator grille (1) with the slots in the radiator support.

Press the retainers into place.

Notice:  Refer to Fastener Notice.

4. Install the bolts (2) that retain the radiator grille (1) to the radiator support.

Tighten the bolts (2) that retain the radiator grille (1) to the radiator support to 1 N.m (9 lb in).

5. Install the park/turn signal lamp.

Grille Replacement (Base)|Page 18444 > < Trailer Hitch|Service and Repair